Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 3 | 115 Hydraulic speed control cylinders Series 1400 - (Ø40 - Ø63) 3 Pneumatic actuation Technical characteristics Construction characteristics Standard strokes 50 - 100 - 150 - 200 - 250 - 300 - 350 - 400 - 450 - 500 mm minimum stroke for type 1400.stroke.03.05 and 1400.stroke.03.06, 150 mm. Important: For heavier load we have available the hydraulic speed control check cylinders of 63 mm diameter suitable to withstand loads up to 1200 kg. For more information please contact our technical department. The SKIP and STOP valves are pneumatically actuated 2 ways poppet valves. The SKIP valve (accelerating device) is normally open and is equipped with a supplementary regulator for maximum speed control. It must be activated to obtain speed regulation. The STOP valve can be normally closed or normally open. Series 1400, Hydraulic speed control cylinders (Ø40 - Ø63) General Max connecting load Min. and max. speed Working temperature Minimum pressure for the actuation of skip and stop valves black anodised aluminium bright painted drawn steel C43 chromed steel plated zinc steel aluminium NBR rubber FPM PUR brass black anodised aluminium hydraulic with viscosity 2.9° E at 50°C (viscosity index minimum 118) 40 mm and 63 mm diameter 600 kg (Ø40) -1200 Kg (Ø63) 60 - 10000 mm/min. -5°C - +70°C End caps Barrels Rod Tie rods Piston Waterproof seals Piston seal Rod seal Regulators group Skip and stop valves Circuit oil Bore 4 bar
RkJQdWJsaXNoZXIy NzYzOTY1