Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Compact cylinders Series 1500 Europe 3 Pneumatic actuatiOn 3 | 139 Series 1500 Europe this series of cylinders is available in two versions with different threaded fixing holes. the first one includes cylinders from Ø32 to Ø100 called "iSO" with fixing holes same as cylinders iSO 6431 - VDma 24562. cylinders from Ø20 to Ø100 called "unitOP", parts of second series, are mainly according to standard unitOP Ru - P/6 - P/7. cylinders Ø12 and Ø16 non standard, are interchangeable with similar products available on the market. the iSO version uses all fixing devices of series 1320 with exception of intermediate trunnion, while for cylinders Ø12, Ø16 and for "unitOP" version are available fixing devices as flanges, foot, male and female clevis made with aluminium or steel. For use of magnetic sensors see directions on next page. Body anodized aluminium Piston rod bushings sintered bronze Seals PuR (on request HnBR) Springs zinc plated steel for springs Pistons from Ø12 to Ø25 brass from Ø32 from Ø100 aluminium alloy 2011 uni 9002/5 Piston rod from Ø12 to Ø25 stainless steel froml Ø32 to Ø100 c43 chromed (on request stainless steel for all bores) end caps from Ø12 to Ø25 aluminium alloy uni 9006/1 anodised from Ø32 to Ø100 uni 5076 aluminium die-casting and painted (cataphoresis) Fixing screws zinc plated steel Operational characteristics Fluid Filtered and lubricated air or non max. working pressure 10 bar Working temperature -30°c ... +80°c with standard seals (magnetic or non magnetic piston) -5°c ... +80°c with HnBR seals (magnetic piston) -5°c ... +120°c with HnBR seals (non magnetic piston) Please follow the suggestions below to ensure a long life for these cylinders: • use clean and lubricated air. • correct alignment during assembly with regard to the applied load so as to avoid radial components or bending the rod. • avoid high speeds together with long strokes and heavy loads: this would produce kinetic energy which the cylinder cannot absorb, especially if used as a limit stop (in this case use mechanical stop device). • evaluate the environmental characteristics of cylinder used (high temperature, hard atmosphere, dust, humidity etc.). Please note: air must be dried for applications with lower temperature. use hydraulic oils H class (iSO VG32) for correct continued lubrication. Standard strokes VERSION DOUBLE ACTING SINGLE ACTING Base through rod Bored through rod non-rotating device through rod and non-rotating device BORE Standard strokes *Maximum suggested strokes Max. stroke **Standard strokes Standard strokes Maximum suggested strokes(please get in touch with our sales rep. for the dimensions) 12 from 5 to 40 mm every 5 mm 150 65 40 5 -10 20 16 250 100 from 5 to 25 mm every 5 mm 75 20 from 5 to 50 mm every 5 mm 450 110 25 32 from 5 to 80 mm every 5 mm 650 125 80 40 50 150 63 80 200 100 *cylinders with longer strokes than those in the chart are also available. the end user is responsible for the load applied on the product and for its correct use. For special applications, please get in touch with our sales rep. **cylinders with longer strokes than those in the chart are also available, exceptionally for applications without twisting moments and/or radial loads on the anti-rotation device. Minimum and maximum springs load Bore Ø12 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 Ø80 Ø100 min. load (n) 3,9 7,2 7,8 9,8 12,3 16,7 27,5 37,3 59,4 101,3 max. load (n) 12,7 37,2 20,6 25,5 34,3 44,1 51,0 63,8 99,4 141,9 Construction characteristics
RkJQdWJsaXNoZXIy NzYzOTY1