Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Guided compact cylinders 3 | 155 Series 6100 3 Pneumatic actuatiOn ►Guided compact cylinder Coding: 6100.Ø.C.G.K Ø BORe 12 = Ø12 16 = Ø16 20 = Ø20 25 = Ø25 32 = Ø32 40 = Ø40 50 = Ø50 63 = Ø63 C StROKe 10 = 10 mm 20 = 20 mm 25 = 25 mm 30 = 30 mm 40 = 40 mm 50 = 50 mm 75 = 75 mm 100 = 100 mm 125 = 125 mm 150 = 150 mm 175 = 175 mm 200 = 200 mm 250 = 250 mm * 300 = 300 mm * 350 = 350 mm * 400 = 400 mm * 450 = 450 mm * 500 = 500 mm * G cOntROL unit B = control unit with bronze bush C = control unit with bearing bushes K cOnnectiOnS = Side supply ports closed L = top supply ports closed *Only for bronze bushings B version Construction characteristics Body anodized aluminium Guide rods c43 chromed steel (control unit with bronze bush) tempered and chromed steel (control unit with bearing bush) Piston aluminium Piston rod stainless steel (for bores Ø12, Ø16, Ø20, Ø25) c43 chromed steel (for bores Ø32, Ø40, Ø50, Ø63) Piston rod bushings bronze or bearing bushing Bottom plates anodized aluminium Piston seals oil resistant nBR rubber Rod seal PuR (nBR 12-16) Wipers PuR Plate zinc plated steel Operational characteristics cushioning elastic bumper on both ends Fluid filtered and lubricated air or not (if lubricated the lubrication must be continuous) Function Double acting Working pressure (bar) max 10 temperature °c -5 ... +70 Standard strokes Stroke Bore Ø12 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 Only for bronze bushings B version intermediate strokes can be obtained by adding specific spacers (5, 10, 15, 20 mm). example: it is possible to obtain a 6100.32.45.B cylinder from a 6100.32.50.B cylinder by adding a 5 mm spacer. the intermediate strokes manufactured without the use of spacers are considered special executions. 10 20 25 30 40 50 75 100 125 150 175 200 250 300 350 400 450 500
RkJQdWJsaXNoZXIy NzYzOTY1