Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Rodless cylinders 3 | 200 Series 1605 - Technical data Pneumatic actuation 3 LC LC K1 K2 50mm Ms K1 = 100N It is important to take into consideration the following formula when there are a combination of forces with torque : How to compute the real load using the formula: After having verified that the CE is lower than 960 N we realise that the life is 1150 Km from the nomograph. All data refers to a linear control unit properly lubricated with linear speed < di 1.5 m/s Max. suggested loads and moments Real load (CE) under combined stressing conditions Nomograph load / life Cylinders with linear control unit Ø32, Ø40 and Ø50 K1 (N) 960 K2 (N) 960 M (Nm) 40 Ms (Nm) 12 Mv (Nm) 40 Applied load K1 or K2 (N) Distance between the supports (mm) Max. load (K1 o K2) depending on the distance LC between the supports Real load CE (N) Nominal life (Km) K1 K2 CE = K1 + K2 + 24 x M + 80 x Ms + 24 x Mv <960 ( ( ( ( ( ( [ [ CE = K1 + K2 + 24 x M + 80 x Ms + 24 x Mv CE = 100 + 0 + 24 x 0 + 80 x 5 + 24 x 0 = 500N ( ( ( ( ( ( ( ( ( ( ( ( [ [ [ [ Example to compute the life Compute the linear control unit life with a load of 100 N applied 50 mm off its axle. 60 70 80 90 100 150 200 300 400 500 600 700 800 900 10 9 8 7 6 5 4 3 2 4 10 9 8 7 6 5 4 3 2 3 10 2X102 9 8 7 6 5 4 3 5 1150 Km (k1) (k2) Ms = 0,05x100 = 5Nm K1 = 100 N 1500 0 200 400 500 1000 ø25, ø32 600 ø40, ø50 20002500 800 1000 1200 3000
RkJQdWJsaXNoZXIy NzYzOTY1