Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice Cylinders according to standard ISO 15552 3 | 1 Series Eco-Smart 3 Pneumatic actuation Series Eco-Smart - with integrated position transducer • According to ISO 15552 standard • Bores Ø40, Ø50, Ø63, Ø80, Ø100 • Strokes up to 1000 mm, with 50 mm increments • Wide range of accessories • IP67 protection degree The cylinders of the Eco-Smart Series are pneumatic actuators according to ISO 15552 standard, equipped with a linear potentiometer integrated into the piston rod. This device enables continuous monitoring of the rod position along the entire stroke, which is detected by processing the internal resistance variation of the transducer. The pistons (from Ø50 to Ø100) are equipped with a permanent magnet, allowing the use of external end of stroke sensors from the SQ, SU, and SR series. The dynamic seals are made of low-friction polyurethane. The electrical connection, made via a male M12 connector located on the rear cap, makes the cylinder compliant with IP67 protection degree. Construction characteristics Piston rod bushings spheroidal bronze on steel strip with PTFE coating Barrel anodised aluminium alloy Seals standard: PUR rod seals, NBR piston seals P version: PUR rod seals, PUR piston seals V version: FPM rod seals, PUR piston seals Q version: plastic rod scraper, NBR rod seals, PUR piston seals R version: metallic rod scraper, FPM rod seals, PUR piston seals Pistons aluminium (magnetic version for external sensor from Ø50 to Ø100) Piston rod C43 chromed steel End caps aluminium Cushion adjustment screw brass Operational characteristics Fluid filtered and preferably lubricated air or not (if lubricated the lubrication must be continuous) Maximum pressure 10 bar Minimum pressure 1 bar Working temperature -5°C ... +70°C (Standard seals) -30°C ... +80°C (P version) -5°C ... +80°C (V version) -20°C ... +80°C (Q version) -10 °C ... +80 °C (R Version) Bore Ø 40 50 63 80 100 Cushioning lenght (front only) mm 20 22 22 32 32 Standard strokes Standard strokes up to 1000 mm, with 50 mm increments
RkJQdWJsaXNoZXIy NzYzOTY1