ELECTRIC ACTUATION Electric cylinders 26 Series 1800 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice TK TL TM TL ØTD UW XV (max.) + stroke XV1 (min.) + stroke XV1 (max.) + stroke XV (max.) + stroke XV1 (min.) + stroke XV1 (max.) + stroke XV (min.) XV (min.) Intermediate trunnion Intermediate trunnion Clevis to be mounted on the barrel to have the centre of rotation of the hinge pin at a point between the end plates of the cylinder. It is attached to the barrel by means of eight pointed grains that block in the “V” groove of the four protruding shapes. In the case of anchorage subject to heavy use, it is recommended to connect the clevis once the right position has been found. Anodized aluminium intermediate trunnion with steel bushes to be mounted on the barrel. This solution allows the cylinder to rotate around the hinge which can be mounted in any position between the end caps. It is attached to the barrel by means of 8 grub screws which secure the trunnion to the extruded barrel. In the case of heavy duty applications it is recommended that the trunnion is secured using expansion pins. In case off applications with high speed, high load and high pressure please contact our technical office. Attention: mounting of the clevis with contact to the end plates does not allow the use of the magnetic sensors as the switch limits. Please note: If the trunnion is mounted in direct contact with the cylinder end cap, it will not be possible to fit magnetic sensors at the end of stroke. Ordering code: 1320.Ø.12F Steel Ordering code: 1320.Ø.12BF Aluminium with steel bushes A TM TL ØTD UW TL S XV (max.) + stroke XV1 (min.) + stroke XV1 (max.) + stroke XV (max.) + stroke XV1 (min.) + stroke XV1 (max.) + stroke XV (min.) XV (min.) Minimum cylinder stroke: 30mm (In addition to stroke required) Size A S TD (e9) TL (h14) TM (h14) UW Weight (g) Maximum axial thrust (N) 32 49 18 Ø12 12 50 59 180 790 40 62 21 Ø16 16 63 62 270 1200 50 73 21 Ø16 16 75 73 330 1900 63 87 27 Ø20 20 90 87 650 3100 Size XV XV1 min. max. + stroke min. + stroke max. + stroke 32 62 51,75 87,75 120,5 40 67,5 57 96 144 50 80,5 73,75 112,75 168,5 63 83,5 76,75 121,75 179,5 Minimum cylinder stroke: 30mm (In addition to stroke required) Size XV XV1 min. max. + stroke min. + stroke max. + stroke 32 62 51,75 87,75 120,5 40 67,5 57 96 144 50 80,5 73,75 112,75 168,5 63 83,5 76,75 121,75 179,5 Size TD TL TM TK UW Weight (g) 32 Ø12 12 50 18 54 70 40 Ø16 16 63 21 60 110 50 Ø16 16 75 21 72 140 63 Ø20 20 90 27 87 280
RkJQdWJsaXNoZXIy NzYzOTY1