NW96-EN

Solenoid valves manifold 7 Series 3000 - STAND ALONE - Version 3100 (10mm) - Self feeding Overalldimensionsand technical informationareprovidedsolely for informativepurposesandmaybemodifiedwithoutnotice AIR DISTRIBUTION Solenoid-Solenoid 5/3 (Closed centres) - Version 3100 (10mm) Coding: 3115. 53.31.35.C C CONNECTION 02 = H 90° SPEED-UP connector 24VDC 82 = M8 SPEED-UP connector 24VDC Operational characteristics “Operating time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001” Coding example Fluid Flow rate at 6 bar with ∆p=1(Nl/min) Response time according to ISO 12238, activation time (ms) Response time according to ISO 12238, deactivation time (ms) Working pressure (bar) Temperature °C Weight (g) 3115.53.31.35. C Solenoid-Solenoid (Closed centres) Filtered air. No lubrication needed, if applied it shall be continuous 150 10 20 2,5 ... 7 -5 ... +50 59 Solenoid-Solenoid 2x3/2 - Version 3100 (10mm) Coding: 3115. 62.F.35.C F FUNCTION 44 = N.C.-N.C. (5/3 Open centres) 45 = N.C.-N.O. 55 = N.O.-N.O. (5/3 Pressured centres) 54 = N.O.-N.C. C CONNECTION 02 = H 90° SPEED-UP connector 24VDC 82 = M8 SPEED-UP connector 24VDC Operational characteristics “Operating time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001” Coding example Fluid Flow rate at 6 bar with ∆p=1(Nl/min) Response time according to ISO 12238, activation time (ms) Response time according to ISO 12238, deactivation time (ms) Working pressure (bar) Temperature °C Weight (g) 3115.62.44.35. C N.C.-N.C. (5/3 Open centres) Filtered air. No lubrication needed, if applied it shall be continuous 150 10 15 2,5 ... 7 -5 ... +50 59,4 3115.62.55.35. C N.O.-N.O. (5/3 Pressured centres) 3115.62.45.35. C N.C.-N.O. 3115.62.54.35. C N.O.-N.C. SHORT FUNCTION CODE: N.C.-N.C. (5/3 Open centres) = “F” N.O.-N.O. (5/3 Pressured centres) = “G” N.C.-N.O. = “H” N.O.-N.C. = “I” L12 = Manual over ride - side 12 L14 = Manual over ride - side 14 SHORT FUNCTION CODE “E” L12 = Manual over ride - side 12 L14 = Manual over ride - side 14 5 14 4 1 3 2 12 87.4 27 22.5 Ø3.2 10.2 M5 31.5 14.5 4 = +24 VDC 3 = GND M8 M8x1 - 6g 3 M5 M5 5 M5 L14 M5 4 2 L12 9.8 C = 02 C = 82 1 1 = N.C. 87.4 27 22.5 Ø3.2 10.2 M5 31.5 14.5 4 = +24 VDC 3 = GND M8 M8x1 - 6g 3 M5 M5 5 M5 L14 M5 4 2 L12 9.8 C = 02 C = 82 1 1 = N.C.