NW96-EN

Solenoid valves manifold 13 Series 3000 - STAND ALONE - Version 3400 (15,5mm) - External feeding Overalldimensionsand technical informationareprovidedsolely for informativepurposesandmaybemodifiedwithoutnotice AIR DISTRIBUTION Solenoid-Solenoid 5/3 (Closed centres) - Version 3400 (15,5mm) Coding: 3415. 53.31.25.C C CONNECTION 02 = H 90° SPEED-UP connector 24VDC 82 = M8 SPEED-UP connector 24VDC Operational characteristics “Operating time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001” Coding example Fluid Flow rate at 6 bar with ∆p=1(Nl/min) Response time according to ISO 12238, activation time (ms) Response time according to ISO 12238, deactivation time (ms) Working pressure (bar) Pilot pressure (bar) Temperature °C Weight (g) 3415.53.31.25. C Solenoid-Solenoid 5/3 (Closed centres) Filtered air. No lubrication needed, if applied it shall be continuous 500 10 20 From vacuum to 10 2,5 ... 7 -5 ... +50 100 Solenoid-Solenoid 2x3/2 - Version 3400 (15,5mm) Coding: 3415. 62.F.25.C F FUNCTION 44 = N.C.-N.C. (5/3 Open centres) 45 = N.C.-N.O. 55 = N.O.-N.O. (5/3 Pressured centres) 54 = N.O.-N.C. C CONNECTION 02 = H 90° SPEED-UP connector 24VDC 82 = M8 SPEED-UP connector 24VDC Operational characteristics “Operating time of pneumatic directional control valves or moving parts, logic devices were measured in accordance to ISO 12238:2001” Coding example Fluid Flow rate at 6 bar with ∆p=1(Nl/min) Response time according to ISO 12238, activation time (ms) Response time according to ISO 12238, deactivation time (ms) Working pressure (bar) Pilot pressure (bar) Temperature °C Weight (g) 3415.62.44.25. C N.C.-N.C. (5/3 Open centres) Filtered air. No lubrication needed, if applied it shall be continuous 500 10 15 From vacuum to 10 ≥3+(02xInlet p.) -5 ... +50 100 3415.62.55.25. C N.O.-N.O. (5/3 Pressured centres) 3415.62.45.25. C N.C.-N.O. 3415.62.54.25. C N.O.-N.C. SHORT FUNCTION CODE: N.C.-N.C. (5/3 Open centres) = “F” N.O.-N.O. (5/3 Pressured centres) = “G” N.C.-N.O. = “H” N.O.-N.C. = “I” L12 = Manual over ride - side 12 L14 = Manual over ride - side 14 SHORT FUNCTION CODE “E” L12 = Manual over ride - side 12 L14 = Manual over ride - side 14 5 14 4 1 3 2 12 25 35 14.5 100.9 15.5 36 Ø3.2 5 1 G1/8” G1/8” 3 G1/8” M8x1 - 6g G1/8” G1/8” 4 2 M5 12 M5 14 L14 L12 C = 02 C = 82 9.8 4 = +24 VDC 3 = GND M8 25 35 14.5 100.9 15.5 36 Ø3.2 5 1 G1/8” G1/8” 3 G1/8” M8x1 - 6g G1/8” G1/8” 4 2 M5 12 M5 14 L14 L12 C = 02 C = 82 9.8 4 = +24 VDC 3 = GND M8