NW96-EN

32 digital inputs & outputs modules (37 pin SUB-D connector) Solenoid valves manifold Series 3000 - Inputs and outputs modules 44 Overalldimensionsand technical informationareprovidedsolely for informativepurposesandmaybemodifiedwithoutnotice AIR DISTRIBUTION General - 32 digital inputs module kit (37 pin SUB-D connector) The module provides a SUB-D 37 pins female connector. Inputs have PNP logic, 24VDC ± 10%. It is possible to connect 2 wires devices (e.g. switches, magnetic limit switches, pressure switches, etc...) as well as 3 wires devices (e.g. proximity sensors, photocells, electronic magnetic limit switches, etc.). Inputs module power supply is provided by 24VDC power input on the serial system (type A, 4 pin M12 power connector, pin 1) or by 5030.M12 additional power supply module, in case it were installed upstream of the inputs module. Ordering code Scheme / Overall dimensions and I/O layout General - 32 digital outputs module kit (37 pin SUB-D connector) Module has a SUB-D 37 pins female connector. Outputs have PNP logic, 24VDC ± 10%. Outputs module power supply is provided by 24VDC power input on the serial system (type A, 4 pin M12 power connector, pin 4) or by 5030.M12 additional power supply module, in case it were installed upstream of the outputs module. Power supply presence is displayed by “PWR OUT” green LED light-on. Each output has a red LED indicator associated which lights up when output’s signal status is high. Ordering code Scheme / Overall dimensions and I/O layout OUT 19 OUT 18 OUT 17 OUT 16 OUT 15 OUT 14 OUT 13 OUT 12 OUT 11 OUT 10 OUT 9 OUT 8 OUT 7 OUT 6 OUT 5 OUT 4 OUT 3 OUT 2 OUT 1 N.C. N.C. GND GND GND OUT 32 OUT 31 OUT 30 OUT 29 OUT 28 OUT 27 OUT 26 OUT 25 OUT 24 OUT 23 OUT 22 OUT 21 OUT 20 19 37 1 20 SUB-D 37 pins connector IN 19 IN 18 IN 17 IN 16 IN 15 IN 14 IN 13 IN 12 IN 11 IN 10 IN 9 IN 8 IN 7 IN 6 IN 5 IN 4 IN 3 IN 2 IN 1 +24V +24V GND GND GND IN 32 IN 31 IN 30 IN 29 IN 28 IN 27 IN 26 IN 25 IN 24 IN 23 IN 22 IN 21 IN 20 19 37 1 20 SUB-D 37 pins connector K5230.32.37P 42 90 28 K5130.32.37P 42 90 28 Technical data Maximum current per module 1A Protection Overcurrent (auto-resettable fuse) Reverse polarity Input impedence 3kΩ Maximum cable length < 30m Input data allocation 32 bit Technical data Maximum current per output 100mA Protection Short circuit (electronic), trigger at 2.8A Maximum cable length < 30m Output data allocation 32 bit