NW96-EN

M8 analogue inputs modules Solenoid valves manifold Series 3000 - Inputs and outputs modules 45 Overalldimensionsand technical informationareprovidedsolely for informativepurposesandmaybemodifiedwithoutnotice AIR DISTRIBUTION General - M8 analogue inputs modules kit M8 analogue inputs module converts analogue signals into digital signals and transfers acquired data to field bus, via network node. Power supply of the M8 analogue inputs module is provided by 24VDC power input on the serial system (type A, 4 pin M12 power connector, pin 1) or by 5030.M12 additional power supply module, in case it were installed upstream of the inputs module. Modules provide M8 3 pins female connectors and a diagnostic LED for every analogue input. The LED indicates signal presence (green) or signal out of range (red). Ordering code Scheme / Overall dimensions and I/O layout M8 3P female connector 4 3 1 PIN DESCRIPTION 1 + 24 VDC (INPUTS) 3 GND 4 INPUT K5230._ _.0_ 42 90 28 42 90 28 CODE SIGNAL ANALOGUE INPUTS MAX. CURRENT PER MODULE (pin1) OCCUPIED INPUTS K5230.2T.00 VOLTAGE 0-10V 2 300 mA 32 (4 bytes) K5230.2T.01 VOLTAGE 0-5V 2 300 mA 32 (4 bytes) K5230.4T.00 VOLTAGE 0-10V 4 750 mA (375 mA for each pair of channels) 64 (8 bytes) K5230.4T.01 VOLTAGE 0-5V 4 750 mA (375 mA for each pair of channels) 64 (8 bytes) K5230.2C.00 CURRENT 4-20mA 2 300 mA 32 (4 bytes) K5230.2C.01 CURRENT 0-20mA 2 300 mA 32 (4 bytes) K5230.4C.00 CURRENT 4-20mA 4 750 mA (375 mA for each pair of channels) 64 (8 bytes) K5230.4C.01 CURRENT 0-20mA 4 750 mA (375 mA for each pair of channels) 64 (8 bytes) Available models Technical data Protection (pin 1) Overcurrent (auto-resettable fuse) Reverse polarity Input impedance (voltage inputs) 33kΩ Digital conversion resolution 12 bit Maximum cable length < 30m Input data allocation 16 bit per channel Diagnostic LED Input signal overcurrent or overvoltage Precision 0,3% F.S.