NW96-EN

AIR DISTRIBUTION Solenoid valves manifold 3 Series 3000 Overalldimensionsand technical informationareprovidedsolely for informativepurposesandmaybemodifiedwithoutnotice Construction characteristics Body Aluminium Operators Technopolymer Spool Aluminium Seals NBR Piston seals NBR Springs AISI 302 stainless steel Pistons Alluminium / Technopolymer Operational characteristics Voltage 24 VDC ±10% Pilot power consumption 1.3W nominal in energy saving mode 0,25W Valve working pressure [1] from vacuum to 10 bar max. Pilot working pressure [12-14] from 2,5 to 7 bar max. Operating temperature from -5°C to +50°C Fluid Filtered air. No lubrication needed, if applied it shall be continuous IP Rating IP65 Solenoid valves series 3000 Pneumax valves and solenoid valves are designed to guarantee versatili- ty and maximum reliability in the control of integrated pneumatic circuits. The Pneumax 3000 series of solenoid valves is a very flexible solution that can be easily configured to optimize the efficiency of the whole system through a constant interface and communication with the machine. The Pneumax 3000 series is available in stand alone and manifold moun - ted versions, including a wide range of functions, capable of working with positive pressures up to 10 Bar or vacuum. The valves have aluminum bodies with integrated electrical connections, manual override and a LED that indicates when the valve is actuated. 3000 series is another addition to the extensive range of solenoid valve systems designed for applications in very demanding industrial sectors such as assembly and robotics, packaging or automotive. • Available with a wide range of serial system protocols • Wide range of accessories • Available sub-base mounted or with M5 threaded ports (Version 3100) and G1/8” (Version 3400) • Suitable for use with pressure or vacuum • Certified • Version 3100 (10mm) and 3400 (15,5mm) • Nominal flow rate up to 200 Nl/min (Version 3100) and up to 600 Nl/min (Version 3400) • Stand alone or manifold mounted versions • Valve replacement without disconnecting the tubes