NW97-EN

Modular FRL Series Airplus Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice AIR TREATMENT 17 Technical characteristics Size Size 3 Size 4 Body and connections type Technopolymer body, integrated technopolymer connections (T version) Technopolymer body, metal connections (N version) / Aluminium body, integrated aluminium connections (P version) Protection and bowl type Technopolymer protection - PC bowl Technopolymer protection - PA bowl Metal protection - PC bowl Metal protection - PA bowl Metal bowl (blind metal bowl) IN / OUT connections T version G1/2” not available N version G3/8” - G1/2” - 1/2” NPT P version G1/2” G1” Assembly configuration Stand alone / Panel mounted Assembly positions Vertical ±5° Filter pore size Particle removal up to 0,01 µm Oil residual 0,01 ppm Bowl capacity 30 cm 3 90 cm 3 Condensation drain Automatic Max. fittings torque IN / OUT connections G3/8” metal: 25 Nm G1/2” metal: 30 Nm G1/2” technopolymer: 22 Nm G1” metal: 35 Nm Operational characteristics Size Size 3 Size 4 Condensation drain Automatic Maximum working pressure 10 bar Minimum working pressure 0,5 bar Working temperature -5 °C ... +50 °C 1 2 Oil removal filter with coalescing filter element Available in 2 sizes with connections from 3/8” to 1” Particle removal up to 0,01 µm Oil residual 0,01 ppm Cartridge clogging level display: - green color - ok - red color - warning (Δp>0,5 bar) Bowl assembly via bayonet type quick coupling mechanism with safety button Automatic drain mounted as standard Atex certification (II 2GD or II 3GD) Note In order to ensure the high level of filtration, it is recommended that a 5 µ filter is installed before the coalescing filter. In order to ensure that any fluid discharged by the auto drain assembly is adequately drained away, it is recommended you use a 6mm fitting and tube. Oil removal filters (DBV - DCV - DAV)