Optyma-S e Optyma-Sc

Overalldimensionsand technical informationareprovidedsolely for informativepurposesandmaybemodifiedwithoutnotice IO-Link Module AIR DISTRIBUTION Solenoid valves manifold 24 Series 2200 "OPTYMA-S" - Serial system General : 5822.32S Ordering code Scheme / Overall dimensions and I/O layout: Technical characteristics Specifications Case PNP equivalent outputs Maximum current for each output Maximum output number Maximum output simultaneously actuated Network connectors Communication speed Maximum distance from Master Bus diagnosis Configurations file IODD IP Rating Temperature range 99 63 52 MAX 32 OUT 2 1 4 3 5 M12 5P MALE IO-Link Specification v1.1 Reinforced technopolymer +24 VDC +/- 10% 100 mA 32 32 “Class B” port COM2 20 m 1 green and 1 red LED for status Available from our web site http://www.pneumaxspa.com IP65 when assembled From 0°C to +50°C Outputs Network PIN SIGNAL 1 L+ P24 (+24 VDC) L- C/Q N24 (GND) 3 4 5 2 "CLASS B" connector IO-Link module is directly integrated on Optyma-S solenoid valves manifold via a 37 poles connector, normally used for multipolar cable connection. Optyma-S solenoid valves connected to node must be PNP equivalent (final 02 in ordering code). The node can be easily installed also on solenoid valves manifold already mounted on equipment. Module can manage up to 32 solenoid valves, and, in the same time, a max number of 4 Input modules 5222.08S. Regardless of the number of Input modules connected, the manageable solenoid valves are 32. Pneumax IO-Link module is equipped with a M12, 5P, “CLASS B” communication connector; valve electric power supply is provided directly through the “CLASS B” communication connector. It supports IO-Link communications speed COM2. IODD configuration files is provided by Pneumax.