AUTOMOTIVE CATALOGUE

Technical information are provided for informative purpose only and can be subject to change without prior notice 27 CLAMPING Automotive Catalogue Clamping C1-Series C1P45EG / Power clamp - 40 mm bore cylinder and mounting pattern interchangeable to 50 and 63 mm bore clamps * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 23/04/2019 WEIGHT 1.45 kg 2 M12x1 40 29.4 62 29.1 18.5 M6 - 10 DEEP Ø6 H7 - 10 DEEP 4.35 83 □ 16 12 ±0.05 35* 38.5 ±0.05 25* 36 28 50 G1/8" 48 40 G1/8" 268 MAX 161 8 33 50 55 34.5 45 11 ±0.1 32 ±0.1 * 27 ±0.05 30* M8 - 10 DEEP Ø8 H7 - 12 DEEP 2 M12x1 40 29.4 62 29.1 18.5 M6 - 10 DEEP Ø6 H7 - 10 DEEP 4.35 83 □ 16 12 ±0.05 35* 38.5 ±0.05 25* 36 28 50 G1/8" 48 40 G1/8" 268 MAX 161 8 33 50 55 34.5 45 11 ±0.1 32 ±0.1 * 27 ±0.05 30* M8 - 10 DEEP Ø8 H7 - 12 DEEP 2 M12x1 40 29.4 62 29.1 18.5 M6 - 10 DEEP Ø6 H7 - 10 DEEP 4.35 83 □ 16 12 ±0.05 35* 38.5 ±0.05 25* 36 28 50 G1/8" 48 40 G1/8" 268 MAX 161 8 33 50 55 34.5 45 11 ±0.1 32 ±0.1 * 27 ±0.05 30* M8 - 10 DEEP Ø8 H7 - 12 DEEP 2 M12x1 40 29.4 62 29.1 18.5 M6 - 10 DEEP Ø6 H7 - 10 DEEP 4.35 □ 16 12 ±0.05 35* 38.5 ±0.05 25* 36 28 50 G1/8" 48 40 G1/8" 268 MAX 161 8 33 50 55 34.5 45 11 ±0.1 32 ±0.1 * 27 ±0.05 30* M8 - 10 DEEP Ø8 H7 - 12 DEEP REV. 00 - 07/11/2019 Clamping arms / 16 mm shaft - Left & right clamping surfaces Ø7 Ø6 H7 20 ±0.02 16 55 34.5 20 ±0.1 (6) 84 ±0.1 65 77 28.55 ±0.1 28.55 ±0.1 22 ±0.1 � 16 110 Ø7 Ø6 H7 20 ±0.02 16 55 34.5 20 ±0.1 (6) 84 ±0.1 65 77 28.55 ±0.1 28.55 ±0.1 22 ±0.1 � 16 110 16 mm shaft – 0 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1613 Aluminum H 0.27 125° 45° 135° 35° MAX Screws: M6x20  Tightening torque: 10 N m / 7.37 lb ft