AUTOMOTIVE CATALOGUE

Technical information are provided for informative purpose only and can be subject to change without prior notice 28 CLAMPING Clamping arms / 16 mm shaft REV. 00 - 23/04/2019 22 ±0.1 □ 16 45 ±0.1 131 Ø9 Ø6 H7 20 34.5 55 (9) 30 ±0.2 23 ±0.1 30 ±0.02 92 ±0.1 79 65 C1P50E / Power clamp - International mount - 50 mm bore * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 31/03/2015 WEIGHT 2.7 kg 13 10 ±0.05 36.5 ±0.05 55 +0.1 -0 10.5 Ø10 H7 - 12 DEEP M10 - 12 DEEP 6.5 78 5.5 4.5 45* 55 ±0.05 29.4 18.5 29 23 ±0.1 50* 93 ±0.1 45 200.5 11 ±0.1 27 ±0.05 32* 30* 12 N9 M8 - 12 DEEP Ø8 H7 - 12 DEEP G1/4" G1/4" 45 47 3.5 45 40 71.5 ±0.05 109 2 48 68 □ 19 M12x1 13 10 ±0.05 36.5 ±0.05 55 +0.1 -0 10.5 Ø10 H7 - 12 DEEP M10 - 12 DEEP 6.5 78 5.5 4.5 45* 55 ±0.05 29.4 18.5 29 23 ±0.1 50* 93 ±0.1 45 200.5 11 ±0.1 27 ±0.05 32* 30* 12 N9 M8 - 12 DEEP Ø8 H7 - 12 DEEP G1/4" G1/4" 45 47 3.5 45 40 71.5 ±0.05 109 2 48 68 □ 19 M12x1 13 10 ±0.05 36.5 ±0.05 55 +0.1 -0 10.5 Ø10 H7 - 12 DEEP M10 - 12 DEEP 6.5 78 5.5 4.5 45* 55 ±0.05 29.4 18.5 29 23 ±0.1 50* 93 ±0.1 45 200.5 314.5 MAX 11 ±0.1 27 ±0.05 32* 30* 12 N9 M8 - 12 DEEP Ø8 H7 - 12 DEEP G1/4" G1/4" 45 47 3.5 45 40 71.5 ±0.05 109 2 48 68 □ 19 M12x1 16 mm shaft – 45 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1654 Aluminum Central 0.3 135° 135° N/A 45° B1655 Aluminum Right 0.3 135° 135° N/A 45° B1656 Aluminum Left 0.3 135° 135° N/A 45° Screws: M6x20  Tightening torque: 10 N m / 7.37 lb ft Automotive Catalogue Clamping C1-Series