AUTOMOTIVE CATALOGUE

Technical information are provided for informative purpose only and can be subject to change without prior notice 55 CLAMPING HE1P4EG / Power clamp - 32 mm bore cylinder and mounting pattern interchangeable to 50 and 63 mm bore clamps WEIGHT 1.36 kg * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 23/04/2019 Clamping arms / 16 mm shaft REV. 00 - 23/04/2019 22 ±0.1 □ 16 45 ±0.1 131 Ø9 Ø6 H7 20 34.5 55 (9) 30 ±0.2 23 ±0.1 30 ±0.02 92 ±0.1 79 65 16 mm shaft – 45 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1654 Aluminum Central 0.3 135° 135° N/A 45° B1655 Aluminum Right 0.3 135° 135° N/A 45° B1656 Aluminum Left 0.3 135° 135° N/A 45° Screws: M6x20  Tightening torque: 10 N m / 7.37 lb ft Ø8 H7 - 12 DEEP M8 - 10 DEEP 27 ±0.05 30* 32 ±0.1 * 11 ±0.1 □ 16 83 4.35 Ø6 H7 - 10 DEEP 18.5 29.1 29.4 40 M12x1 M6 - 10 DEEP 36 25* 35* 28 38.5 ±0.05 12 ±0.05 33 8 161 48 50 G1/8" 45 34.5 55 50 271.5 MAX G1/8" 42 47 2 Ø8 H7 - 12 DEEP M8 - 10 DEEP 27 ±0.05 30* 32 ±0.1 * 11 ±0.1 □ 16 83 4.35 Ø6 H7 - 10 DEEP 18.5 29.1 29.4 40 M12x1 M6 - 10 DEEP 36 25* 35* 28 38.5 ±0.05 12 ±0.05 33 8 161 48 50 G1/8" 45 34.5 55 50 271.5 MAX G1/8" 42 47 2 Ø8 H7 - 12 DEEP M8 - 10 DEEP 27 ±0.05 30* 32 ±0.1 * 11 ±0.1 □ 16 83 4.35 Ø6 H7 - 10 DEEP 18.5 29.1 29.4 40 M12x1 M6 - 10 DEEP 36 25* 35* 28 38.5 ±0.05 12 ±0.05 33 8 161 48 50 G1/8" 45 34.5 55 50 271.5 MAX G1/8" 42 47 2 Ø8 H7 - 12 DEEP M8 - 10 DEEP 27 ±0.05 30* 32 ±0.1 * 11 ±0.1 □ 16 83 4.35 Ø6 H7 - 10 DEEP 18.5 29.1 29.4 40 M12x1 M6 - 10 DEEP 36 25* 35* 28 38.5 ±0.05 12 ±0.05 33 8 161 48 50 G1/8" 45 34.5 55 50 271.5 MAX G1/8" 42 47 2 Automotive Catalogue Clamping HE1-Series