AUTOMOTIVE CATALOGUE

Technical information are provided for informative purpose only and can be subject to change without prior notice 76 CLAMPING Automotive Catalogue Clamping CB-Series CB63EG / Power clamp with double arm - 63 mm bore * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 24/09/2019 104 30.4 41 18.5 29.1 M12x1 M10 - 11 DEEP 10 H7- 11 DEEP 150 55 -0 0.1+ 0.1+ 160 2 280 49 55 45* 49 3.5 48 M8 - 11 DEEP Ø8 H7 - 11 DEEP 329 228 12 H7 48 45 71.5 32* 63.5 27 30* 48 *DIMENSIONALTOLERANCEFORDOWELHOLES: 0.02 DIMENSIONALTOLERANCEFORTHREADEDHOLES: 0.1 CB63EG REV. 00 - 01/04/2020 UNI-ISO 228/1 - G 1/4 UNI-ISO 228/1 - G 1/4 68 ±0.05 ±0.05 ±0.05 ±0.1 50* 106 WEIGHT 6 kg 104 30.4 41 18.5 29.1 M12x1 M10 - 11 DEEP 10 H7- 11 DEEP 50 55 -0 0.1+ 0.1+ 160 2 280 49 55 45* 49 3.5 48 M8 - 11 DEEP Ø8 H7 - 11 DEEP 329 228 12 H7 48 45 71.5 32* 63.5 27 30* 48 *DIMENSIONALTOLERANCEFORDOWELHOLES: 0.02 DIMENSIONALTOLERANCEFORTHREADEDHOLES: 0.1 CB63EG REV. 00 - 01/04/2020 UNI-ISO 228/1 - G 1/4 UNI-ISO 228/1 - G 1/4 68 ±0.05 ±0.05 ±0.05 ±0.1 50* 106 Clamping arms / 16 mm shaft - 10 mm offset - Specific for CB40 clamps � 16 19 ±0.1 110 10 ±0.1 55 34.5 16 Ø6 H7 Ø7 63 75 20 ±0.02 84 ±0.1 20 ±0.2 (6) 23 ±0.1 � 16 19 ±0.1 110 10 ±0.1 55 34.5 16 Ø6 H7 Ø7 63 75 20 ±0.02 84 ±0.1 20 ±0.2 (6) 23 ±0.1 16 mm shaft - 0 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 5 Max op. angle pos. 6 B1618 Aluminum Central 0.22 90° 90° Screws: M6x25  Tightening torque: 10 N m / 7.37 lb·ft 16 mm shaft - 10 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 5 Max op. angle pos. 6 B1661 Aluminum Central 0.24 90° 90° Screws: M6x25  Tightening torque: 10 N m / 7.37 lb·ft REV. 00 - 24/09/2019 WEIGHT 2.5 kg