AUTOMOTIVE CATALOGUE

Technical information are provided for informative purpose only and can be subject to change without prior notice 23 CLAMPING C1P40E / Power clamp - International mount - 40 mm bore * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 31/03/2015 * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 17/06/2015 C1D_ 40E / Power clamp - International mount - 40 mm bore with manual operation WEIGHT 1.75 kg D2 handle included WEIGHT 1.45 kg □ 16 12 ±0.05 28 36 83 25 ±0.05 40 +0.1 -0 4.35 4 Ø6 H7 - 10 DEEP M6 - 10 DEEP 35* 60 ±0.1 4 3 25* 38.5 ±0.05 18.5 29.2 62 33 50 8 161 47 ±0.05 7.5 ±0.1 8 H7 20 ±0.05 25* 260 MAX M6 - 10 DEEP Ø6 H7 - 8 DEEP G1/8" 40 48 45 29.4 40 M12x1 G1/8" 2 34.5 55 35* □ 16 25 ±0.05 40 +0.1 -0 4.35 4 Ø6 H7 - 10 DEEP 10 DEEP 35* 60 ±0.1 4 3 25* 38.5 ±0.05 18.5 29.2 62 161 47 ±0.05 7.5 ±0.1 8 H7 20 ±0.05 25* 260 MAX M6 - 10 DEEP Ø6 H7 - 8 DEEP G1/8" 40 48 45 29.4 40 M12x1 G1/8" 2 34.5 55 35* □ 16 12 ±0.05 28 36 83 25 ±0.05 40 +0.1 -0 4.35 4 Ø6 H7 - 10 DEEP M6 - 10 DEEP 35* 60 ±0.1 4 3 25* 38.5 ±0.05 18.5 29.2 62 33 50 8 161 47 ±0.05 7.5 ±0.1 8 H7 20 ±0.05 25* 260 MAX M6 - 10 DEEP Ø6 H7 - 8 DEEP G1/8" 40 48 45 29.4 40 M12x1 G1/8" 2 34.5 55 35* Handle swivel angle Arm opening angle A Handle swivel angle 0° 4.12° 15° 22.65° 30° 38.2° 45° 58.4° 60° 83.6° 75° 107.6° 90° 123.6° 105° 132.75° 120° 137.7° 135° 140° Automotive Catalogue Clamping C1-Series D2 version D1 version 2 62 29.1 18.5 3 4 60 M6 - 10 DEEP 6 H7 - 10 DEEP 4 4.35 40 83 16 25 12 35* 38.5 25* 36 28 50 G1/8" 48 40 G1/8" 6 H7- 10 DEEP M6 - 10 DEEP 245 MAX 8 H7 161 8 33 47 20 25* 7.5 50 55 34.5 41 13 85.7 NSIONAL TOLERANCE FOR DOWEL HOLES: 0.02 SIONAL TOLERANCE FOR THREADED HOLES: 0.1 REV. 00 - 17/06/2015 C1D _ 40E 35* 135° MAX 36.5 81 162 M5x16 screws Tightening torque: 5 Nm / 3.68 Lb ft ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 +0.1 -0 ±0.1 A 2 62 29.1 18.5 3 4 60 6 - 10 DE P 6 H7 - 10 DE P 4 4.35 40 83 16 25 12 35* 38.5 25* 36 28 50 G1/8" 48 40 G1/8" 6 H7- 10 DE P 6 - 10 DE P 245 MAX 8 H7 161 8 33 47 20 25* 7.5 50 5 34.5 41 13 85.7 SIO AL TOLERA CE FOR DO EL HOLES: 0.02 SIO AL TOLERA CE FOR THREADED HOLES: 0.1 REV. 0 - 17/06/2015 C1D _ 40E 35* 135° MAX 36.5 81 162 5x16 screws Tightening torque: 5 N / 3.68 Lb ft ±0. 5 ±0.05 ±0. 5 ±0. 5 ±0. 5 +0.1 -0 ±0.1