Technical information are provided for informative purpose only and can be subject to change without prior notice 29 C1P45EG / Power clamp - 40 mm bore cylinder and mounting pattern interchangeable to 50 and 63 mm bore clamps * DIMENSIONAL TOLERANCE FOR DOWEL HOLES: ±0.02 DIMENSIONAL TOLERANCE FOR THREADED HOLES: ±0.1 REV. 00 - 23/04/2019 WEIGHT 1.45 kg CLAMPING Automotive Catalogue Clamping C1-Series Clamping arms / 16 mm shaft REV. 00 - 23/04/2019 22±0.1 □16 45±0.1 131 Ø9 Ø6 H7 20 34.5 55 (9) 30±0.2 23±0.1 30±0.02 92±0.1 79 65 16 mm shaft – 45 mm offset Part no. Material Version Weight (kg) Max op. angle pos. 1 Max op. angle pos. 2 Max op. angle pos. 3 Max op. angle pos. 4 B1654 Aluminum Central 0.3 135° 135° N/A 45° B1655 Aluminum Right 0.3 135° 135° N/A 45° B1656 Aluminum Left 0.3 135° 135° N/A 45° Screws: M6x20 Tightening torque: 10 N m / 7.37 lb ft 2 M12x1 40 29.4 62 29.1 18.5 M6 - 10 DEEP Ø6 H7 - 10 DEEP 4.35 83 □16 12±0.05 35* 38.5±0.05 25* 36 28 50 G1/8" 48 40 G1/8" 268 MAX 161 8 33 50 55 34.5 45 11±0.1 32±0.1* 27±0.05 30* M8 - 10 DEEP Ø8 H7 - 12 DEEP 2 M12x1 40 29.4 62 29.1 18.5 M6 - 10 DEEP Ø6 H7 - 10 DEEP 4.35 83 □16 12±0.05 35* 38.5±0.05 25* 36 28 50 G1/8" 48 40 G1/8" 268 MAX 161 8 33 50 55 34.5 45 11±0.1 32±0.1* 27±0.05 30* M8 - 10 DEEP Ø8 H7 - 12 DEEP
RkJQdWJsaXNoZXIy NzYzOTY1