Technical information are provided for informative purpose only and can be subject to change without prior notice 41 C2-Series Pneumax clamps’ series have all been developed with a modern and compact design which goes towards enhancing the operational performances, such as the cycle time, combined with a very limited total weight without compromising their strength and resistance. Pneumatic power clamps conforming to the NAAMS Standard Technical features Manual release button to open the linkage when air pressure is removed during setup. Pneumatic ports on both sides of the cylinder. Operating features Operating pressure from 2 to 8 bar / from 30 to 115 psi Lubrication all the devices are lubricated for life at the factory. Inline air lubrication isn’t required Functional charts • Air consumption Air consumption for complete cycle (opening and closing) REV. 00 - 16/06/2015 • Clamping moment (at 5 bar / 72.5 psi) 185 N m / 136,44 lb·ft The above data are meant for correct working conditions of the clamp with the same performance level during its life time. For applications which exceed the above data, please contact our sales representatives. • Holding moment 800 N m / 590,04 lb·ft • Tooling weight chart 5 bar operating pressure – 135° opening angle REV. 00 - 16/06/2015 0 0 5 10 15 30 Air consumption (Nl) Opening angle (°) 45 60 75 90 105 120 135 0.5 1.0 1.5 2.0 2.5 3.0 0 70 90 110 130 150 Load (kg) Distance from center of gravity to pivot point (mm) 170 190 210 230 250 1 2 3 4 5 6 7 8 9 10 11 Air consumption (Nl) at 2 bar / 30 psi Air consumption (Nl) at 5 bar / 72.5 psi Air consumption (Nl) at 8 bar / 115 psi Size 50 mm 0.8 s 1.7 s NO FLOW VALVE REQUIRED CLAMPING Automotive Catalogue Clamping C2-Series
RkJQdWJsaXNoZXIy NzYzOTY1