CAT11-EN

VACUUMGENERATORS Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 81 Accessories and spare parts for multifunction vacuum generators “SE” -“ME” series 1900 Vacuum technology Catalogue Output circuit wiring scheme Technical features Working pressure range -100.0 ... 100.0 kPa Regulation pressure range -100.0 ... 100.0 kPa Maximum supported pressure 300 kPa Allowed fluids Air, non-corrosive gases, non-combustible gases Pressure calibration sensitivity kPa 0.1 2 kgf/cm 2 0.001 bar 0.001 psi 0.01 InHg 0.1 mmHg 1 mmH 2 O 0.1 Supply voltage From 12 to 24 VDC ± 10% Current consumption ≤ 60 mA Digital output PNP N.O. 2 outputs Maximum load current: 80 mA Maximum supply voltage: 30 VDC Voltage drop: ≤1 V Repeatability (Digital output) ± 0.2% Full Scale ± 1 digit Digital output Type of hysteresis Fixed Hysteresis 0.003 bar Response time ≤2,5 ms (anti-interference function: 24 ms, 192 ms and 768 ms selectable) Protection from short circuit at output Present Display Display with 3 1/2 digits (sampling 5 times per sec.) Indicator precision ±2% F. S. ±1 digit (at ambient temperature of 25°C ± 3°C) Indicator LED green (output1) LED red (output2) Ingress protection rating IP Rating IP40 Ambient temperature Operational: 0°C ... 50°C, Storage: -20°C ... 60°C (without ice or condensation) Ambient humidity Operational/Storage: 35 ... 85% (without condensation) Supported voltage 1000 VAC in 1-min. (between body and cable) Insulation resistance 50MΩ min. (at 500 VDC, between body and cable) Vibration Total amplitude 1.5 mm. or 10 G, 10 Hz - 55 Hz - 10 Hz scanning for 1 minute, 2 hours in each direction of X, Y and Z Impacts/shocks 980m/s² (100G), 3 times in each direction of X, Y and Z Temperature characteristics ±2% Full Scale in a range between 0 ... 50°C Type of connection G1/8" (Swivel) Electrical cable Oil resistant cable Weight Approximately 67 g (with 2 metres of cable) Ordering code DS.30.C.C.F8. L . O L CABLE LENGTH B=300 mm * D=2000 mm ** O OPTIONS 0= Without connector 2= With M8 4 Pin male connector * only with M8 connector ** only without connector Digital vacuum switch