CANopen® module is directly integrated on Enova solenoid valves manifold via a 25 poles connector, normally used for multipolar cable connection.
Enova solenoid valves connected to node must be PNP equivalent (final 02 in ordering code).
The node can be easily installed also on solenoid valves manifold already mounted on equipment.
Module can manage up to 22 solenoid valves, and, in the same time, a max number of 3 Input modules 5200.08. CANopen® module recognizes automatically the presence of the Input modules on power on.
Regardless of the number of Input modules connected, the managable solenoid valves are 22.
Node power supply is made by a M12 4P male circular connector.
The separation between node 24 VDC Power supply and outputs 24 VDC allows to switch off the outputs maintaning powered the node and inputs, if present. Connection to Bus CANopen® is possible via 2 M12 5P male – female circular connectors; these two are connected in parallel and according to CiA Draft Standard Proposal 301 V 4.10 (15 August 2006).
Transmission speed can be set by 3 dip-switches.
The node address can be set by 6 dip-switches using BCD numeration.
The module includes an internal terminating resistance that can be activated by a dip-switch.
-
CANOPEN (EDS) ENOVA REV. DEVICENET (EDS) ENOVA REV. PROFIBUS (GSD) ENOVA REV. -
2300 Enova Series REV. 2 IT-EN 2300 ENOVA SERIES (SERIAL SYSTEMS) REV. 2 IT - EN -
2300 Enova Series EU/UK Declaration of Conformity REV. 0 IT-EN 2300 Enova Series Instruction Manual REV. 2 IT-EN 2300 Enova Series UL & CSA certificate of compliance REV. 0 IT-EN
Attachments
- zip
- 275.47 KB
- Download